Delta Electronics DOP-A/AE/AS manual 123

Delta DOP Series HMI Connection ManualDOP-A/AE/AS Series

Register Type	Format
Output Image	QWn
Output Image	QDn
Internal Bits	MWn
Internal Bits	MDn
Data Area	DBm.DBWn
	DBm.DBDn
Data Area (DB10)	DBWn
	DBDn
	VWn
	VDn
Timer	Tn
Counter
	Cn

NOTE

Read/Write Range

Word No.	Bit No.
n: 0 ~ 65534	N/A
n: 0 ~ 65532	N/A
n: 0 ~ 65534	N/A
n: 0 ~ 65532	N/A
n: 0 ~ 65534	m: 1 ~ 255
n: 0 ~ 65532	m: 1 ~ 255
n: 0 ~ 65534	N/A
n: 0 ~ 65532	N/A
n: 0 ~ 65534	N/A
n: 0 ~ 65532	N/A
n: 0-65535	N/A
n: 0-65535	N/A

1)The valid digit number of the value for the T(Timer) and C(Counter) is 3-digits only. Therefore, please enter a 3-digit number. If entering a number that exceeds 3 digits, only the first 3 digits are valid (decimal format). The other digits of the value for the T(Timer) will be replaced as 0 and the other digits of the value for the C(Counter) will be abandoned. For example, assume that the users enter the value “12345”, the actual write value for the T(Timer) will be “12300” and the actual write value for the C(Counter) will be “123”.

Contacts

Contact type	Format
Input Image	In.b
Output Image	Qn.b
Internal Bit	Mn.b
Data Area Bit	DBm.DBXn.b
Data Area Bit (10 DB)	DBXn.b
	Vn.b

Read/Write Range

Word No.	Bit No.
n: 0 ~ 65535	b: 0 ~ 7
n: 0 ~ 65535	b: 0 ~ 7
n: 0 ~ 65535	b: 0 ~ 7
n: 0 ~ 65535	b: 0 ~ 7
	m = 1 ~ 255
n: 0 ~ 65535	b: 0 ~ 7
n: 0 ~ 65535	b: 0 ~ 7

NOTE

1) For all contacts when performing “Multiple Duplicate” function:

yIf it exceeds 65535 when increasing, it will be regarded as 0.

yIf it is less than 0, it will be regarded as 655XX.

Revision January, 2008, Doc. Name: 2007PDD23000007 1-123