Delta Electronics DOP-A/AE/AS manual Mitsubishi FX Series PLC via Computer Link

Delta DOP Series HMI Connection ManualDOP-A/AE/AS Series

Mitsubishi FX Series PLC via Computer Link Back to Table

A. HMI factory settings

Baud rate: 9600, 7, EVEN, 1.

Controller Station number: 0.

Control area/status area: D0 / D10.

NOTE

1)This communication protocol supports FX series RS485 and RS232 communication module.

2)The default setting of this communication protocol is to support RS485 communication module. If the user needs to use RS232 communication module, the user must change the communication setting from RS485 to RS232 manually.

3)For more detailed information regarding the communication setting method, please refer to Mitsubishi Communication User Manual named “User’s Manual - Data Communication Edition”.

B. Definition of controller Read/Write address

Registers

Register Type	Format	Read/Write Range		Data length
		Word No.	Bit No.
Auxiliary Relay	Mn	n: 0-7679	N/A	Word
Special Auxiliary Relay	Mn	n: 8000-8511	N/A	Word
Status Relay	Sn	n: 0-4095	N/A	Word
Input Relay	Xn	n: 0-377(octal)	N/A	Word
Output Relay	Yn	n: 0-377(octal)	N/A	Word
Timer PV	Tn	n: 0-255	N/A	Word
16-bit Counter PV	Cn	n: 0-199	N/A	Word
32-bit Counter PV	Cn	n: 200-255	N/A	Double Word
Data Register	Dn	n: 0-7999	N/A	Word
Special Data Register	Dn	n: 8000-8511	N/A	Word

¾Auxiliary Relay / Special Auxiliary Relay / Status Relay / Input Relay / Output Relay: Address must be the multiple of 16.

Contacts

Contact type		Format		Read/Write Range
			Word No.		Bit No.
Auxiliary Relay	Mn		N/A		n: 0-7679
Special Auxiliary Relay	Mn		N/A		n: 8000-8511
Status Relay	Sn		N/A		n: 0-4095
1-86			Revision January, 2008, Doc. Name: 2007PDD23000007