Delta Electronics DOP-A/AE/AS manual Keyence KV/KZ Series

Delta DOP Series HMI Connection ManualDOP-A/AE/AS Series

Keyence KV/KZ Series Back to Table

A. HMI factory settings

Baud rate: 9600, 8, EVEN, 1 (RS-232).

Controller station number: 0. (no PLC station number in protocol, therefore, only 1(HMI) to 1 (PLC) communication is allowed.)

Control area/status area: DM-0 / DM-10.

NOTE

1)Please notice that no PLC station number in protocol, therefore, only 1(HMI) to 1 (PLC) communication is allowed.

2)Only 1 Bit or 1 Word can be transferred for each communication. (Communication speed is slow.)

B. Definition of controller Read/Write address

Registers

	Register Type	Format			Read/Write Range				Data Length
				Word No.			Bit No.
	Timer	T-nnn	nnn:	0	~ 199		N/A		Word
	Counter	C-nnn	nnn:	0	~ 199		N/A		Word
	High-speed Counter	CTH-n	n:	0	~ 1		N/A		Word
	High-speed Counter	CTC-n	n:	0	~ 3		N/A		Word
	Comparator
	Data Memory	DM-nnnn	nnnn:	0	~ 1999		N/A		Word
	Temporary Data Memory	TM-nn	nn:	0	~ 31		N/A		Word
	Timer Preset Value	PT-nnn	nnn:	0	~ 199		N/A		Word
	Counter Preset Value	PC-nnn	nnn:	0	~ 199		N/A		Word
	CTC Preset Value	PCTC-n	n:	0	~ 3		N/A		Word
Contacts
	Contact type	Format				Read/Write Range
				Word No.				Bit No.
	Relay	R-nnnbb	nnn: 0 ~ 69				bb:	00 ~ 15
	Timer	T-nnn	N/A				nnn:	0 ~ 199
	Counter	C-nnn	N/A				nnn:	0 ~ 199
	High-speed counter	CTC-n	N/A				n:	0 ~ 3
	comparator

1-44 Revision January, 2008, Doc. Name: 2007PDD23000007