Delta Electronics DOP-A/AE/AS manual Koyo K-Sequence

Delta DOP Series HMI Connection ManualDOP-A/AE/AS Series

Koyo K-Sequence Back to Table

A. HMI factory settings

Baud rate: 9600, 8, ODD, 1 (RS-232).

Controller station number: 1.

Control area/status area: R1400 / R1420.

NOTE

1)If read / write address exceeds the valid range, HMI will stop read/write operation and show “….Error 6….. Command Can Not be Executed….” on the screen.

B. Definition of controller Read/Write address

Registers

Register Type	Format			Read/Write Range		Data
				Word No.	Bit No.	Length
Input Status	Xnnnn	nnnn:	0	~ 1760 (octal)	N/A	Word
Output Status	Ynnnn	nnnn:	0	~ 1760 (octal)	N/A	Word
Link Relays	GXnnnn	nnnn:	0	~ 3760 (octal)	N/A	Word
Relays	GQnnnn	nnnn:	0	~ 3760 (octal)	N/A	Word
Relays	Mnnnn	nnnn:	0	~ 3760 (octal)	N/A	Word
Stage	Snnnn	nnnn:	0	~ 1760 (octal)	N/A	Word
Timer Status	Tnnn	nnn:	0	~ 360 (octal)	N/A	Word
Control Relays	Cnnn	nnn:	0	~ 360 (octal)	N/A	Word
Special Relay 1	SPnnn	nnn:	0	~ 760 (octal)	N/A	Word
Register	Rnnnnn	nnnnn: 0 ~ 41237 (octal)			N/A	Word
Register	Pnnnnn	nnnnn:	0	~ 37777 (octal)	N/A	Word

¾nnnn: Is in octal format and must be the multiple of 16 except for R and P.

Contacts

Contact type	Format		Read/Write Range
		Word No.		Bit No.
Input Status	Xnnnn	N/A	nnnn: 0 ~ 1777 (octal)
Output Status	Ynnnn	N/A	nnnn: 0 ~ 1777 (octal)
Linker Relays	GXnnnn	N/A	nnnn: 0 ~ 3777 (octal)
Relays	GQnnnn	N/A	nnnn: 0 ~ 3777 (octal)
Control Relays	Mnnnn	N/A	nnnn: 0 ~ 3777 (octal)
Stage	Snnnn	N/A	nnnn: 0 ~ 1777 (octal)
Timer Status	Tnnn	N/A	nnn: 0 ~ 377 (octal)

Revision January, 2008, Doc. Name: 2007PDD23000007 1-49