Delta Electronics DOP-A/AE/AS manual Mitsubishi Q Series Computer Link

Delta DOP Series HMI Connection ManualDOP-A/AE/AS Series

Mitsubishi Q Series Computer Link Back to Table

A. HMI factory settings

Baud rate: 19200, 8, None, 1.

Controller Station number: 0.

Control area/status area: D0 / D10.

NOTE

1)This communication protocol supports Q series RS232 communication module (QJ71C24-R2) and RS422 communication protocol (QJ71C24N).

2)Before using this communication protocol, the user needs to set communication module via PC software , GX Developer. For more detailed information regarding the setting method, please refer to Mitsubishi User Manual named “User’s Manual (Basic) - Q Corresponding Series Communication Module”.

B. Definition of controller Read/Write address

Registers

Register Type	Format	Read/Write Range		Data length
		Word No.	Bit No.
Input	Xn	n: 0-1FFF	N/A	Word (multiple of 16)
Output	Yn	n: 0-1FFF	N/A	Word (multiple of 16)
Internal Relay	Mn	n: 0-8191	N/A	Word (multiple of 16)
Special Internal Relay	Mn	n: 9000-9255	N/A	Word (9000 + multiple of 16)
Link Relay	Bn	n: 0-1FFF	N/A	Word (multiple of 16)
Annunciator	Fn	n: 0-2047	N/A	Word (multiple of 16)
Timer Value	TNn	n: 0-2047	N/A	Word
Counter Value	CNn	n: 0-2047	N/A	Word
Data Register	Dn	n: 0-8191	N/A	Word
Special Data Register	Dn	n: 9000-9255	N/A	Word
Link Register	Wn	n: 0-1FFF	N/A	Word

¾Xn, Yn, Bn, Wn : n is in hexadecimal.

Contacts

Contact type		Format		Read/Write Range
			Word No.		Bit No.
Input	Xn		N/A		n: 0-1FFF
Output	Yn		N/A		n: 0-1FFF
Internal Relay	Mn		N/A		n: 0-8191
Special Internal Relay	Mn		N/A		n: 9000-9255
1-84			Revision January, 2008, Doc. Name: 2007PDD23000007