Delta Electronics DOP-A/AE/AS manual GE Fanuc 90 Series SNP PLC

Delta DOP Series HMI Connection ManualDOP-A/AE/AS Series

GE Fanuc 90 Series SNP PLC Back to Table

A. HMI factory settings

Baud rate: 19200, 8, ODD, 1.

Controller Station number: 0. (no PLC station number in protocol, therefore, only 1(HMI) to 1 (PLC) communication is allowed.)

Control area/status area: %R1 / %R10.

NOTE

1)Please notice that no PLC station number in protocol, therefore, only 1(HMI) to 1 (PLC) communication is allowed.

2)If the PLC enabled “Check Password” function, the user needs to set the password by clicking Option > Configuration > Communication. The user can find Controller Settings and set PLC password on Communication Tab in the Configuration dialog box. Please enter a 4-digit password (If entering a password that exceeds 4-digit number, only the first 4-digit number is valid).

B. Definition of controller Read/Write address

Registers

Register Type	Format		Read/Write range		Data length
		Word No.		Bit No.
Discrete Inputs	%In	n: 1 ~ 12288		N/A	Word (the multiple of 16 + 1)
Discrete Outputs	%Qn	n: 1 ~ 12288		N/A	Word (the multiple of 16 + 1)
Discrete Temporaries	%Tn	n: 1 ~ 256		N/A	Word (the multiple of 16 + 1)
Discrete Internals	%Mn	n: 1 ~ 12288		N/A	Word (the multiple of 16 + 1)
%SA Discretes	%SAn	n: 1 ~ 128		N/A	Word (the multiple of 16 + 1)
%SB Discretes	%SBn	n: 1 ~ 128		N/A	Word (the multiple of 16 + 1)
%SC Discretes	%SCn	n: 1 ~ 128		N/A	Word (the multiple of 16 + 1)
%S Discretes	%S-n	n: 1 ~ 128		N/A	Word (the multiple of 16 + 1)
Genius Global Data	%Gn	n: 1	~ 7680	N/A	Word (the multiple of 16 + 1)
Registers	%Rn	n: 1	~ 16384	N/A	Word
Analog Inputs	%AIn	n: 1	~ 8192	N/A	Word
Analog Outputs	%AQn	n: 1	~ 8192	N/A	Word

1-34 Revision January, 2008, Doc. Name: 2007PDD23000007