Delta Electronics DOP-A/AE/AS manual Mitsubishi a Series AJ71UC24 Communication Module

Delta DOP Series HMI Connection ManualDOP-A/AE/AS Series

Mitsubishi A Series AJ71UC24 Communication Module Back to Table

A. HMI factory settings

Baud rate: 9600, 8, ODD, 1.

Controller Station number: 0.

Control area/status area: D0 / D10.

NOTE

1)This driver utilizes CheckSum.

2)Please set “PLC Mode” switch to position 5.

3)If OUTPUT Relay (Y) and Special Data Relay (SM) are set to 1, PLC will stop communication and the communication will not recover automatically. PLC will need to be manually reset.

B. Definition of controller Read/Write address

Registers

Register Type	Format		Read/Write Range		Data length
		Word No.		Bit No.
Input	Xn	n: 0 ~ 7FF		N/A	Word (multiple of 16)
Output	Yn	n: 0 ~ 7FF		N/A	Word (multiple of 16)
Link Relay	Bn	n: 0 ~ FFF		N/A	Word (multiple of 16)
Internal Relay	Mn	n: 0 ~ 8191		N/A	Word (multiple of 16)
Special Internal Relay	SMn	n: 9000 ~ 9255		N/A	Word (9000 + multiple of 16)
Latch Relay	Ln	n: 0 ~ 2047		N/A	Word (multiple of 16)
Annunciator	Fn	n: 0 ~ 2047		N/A	Word (multiple of 16)
Timer Value	TNn	n: 0 ~ 999		N/A	Word
Counter Value	CNn	n: 0	~ 999	N/A	Word
Data Register	Dn	n: 0	~ 8191	N/A	Word
Special Data Register	SDn	n: 9000 ~ 9255		N/A	Word
File Register	Rn	n: 0	~ 8191	N/A	Word
Link Register	Wn	n: 0	~ FFF	N/A	Word

1-76 Revision January, 2008, Doc. Name: 2007PDD23000007