Delta Electronics DOP-A/AE/AS manual HMI factory settings

Delta DOP Series HMI Connection ManualDOP-A/AE/AS Series

Festo PLC Back to Table

A. HMI factory settings

Baud rate: 9600, 8, None, 1.

Controller Station number: 0. (no PLC station number in protocol)

Control area/status area: R0 / R10.

NOTE

1) Connectable PLC: FEC-FC Model

B. Definition of controller Read/Write address

Registers

Register Type	Format	Word No.		Bit No.	Data Size
WORD_DEVICE_IW	Iwn	n: 0 ~ 255	N/A		Word
WORD_DEVICE_OW	Own	n: 0 ~ 255	N/A		Word
WORD_DEVICE_FW	FWn	n: 0 ~ 9999	N/A		Word
WORD_DEVICE_TW	TWn	n: 0 ~ 255	N/A		Word
WORD_DEVICE_CW	CWn	n: 0 ~ 255	N/A		Word
WORD_DEVICE_R	Rn	n: 0 ~ 255	N/A		Word
WORD_DEVICE_TP	TPn	n: 0 ~ 255	N/A		Word
WORD_DEVICE_CP	CPn	n: 0 ~ 255	N/A		Word

Contacts

Register Type	Format
BIT_DEVICE_I	In.b
BIT_DEVICE_O	On.b
BIT_DEVICE_F	Fn.b
BIT_DEVICE_T	Tn
BIT_DEVICE_C	Cn
BIT_DEVICE_TON	TONn
BIT_DEVICE_TOFF	TOFFn

Word No.

n:0 ~ 255

n:0 ~ 255

n:0 ~ 9999 N/A

N/A

N/A

N/A

Bit No.

b:0 ~ 15

b:0 ~ 15

b:0 ~ 15

n:0 ~ 255

n:0 ~ 255

n:0 ~ 255

n:0 ~ 255

¾BIT_DEVICE_T / BIT_DEVICE_C / BIT_DEVICE_TON / BIT_DEVICE_TOFF: Only 1 Bit can be transferred for each communication.

¾Only 1 Bit or 1 Word can be transferred for each write command.

1-32 Revision January, 2008, Doc. Name: 2007PDD23000007