Delta Electronics manual Delta DOP Series HMI Connection Manual DOP-A/AE/AS Series

	Delta DOP Series HMI Connection ManualDOP-A/AE/AS Series
MKS MC700/720 Motion Controller	Back to Table
A. HMI factory settings

Baud rate: 9600, 7, EVEN, 1.

Controller Station number: 11 (NOTE 1).

Control area/status area: None / None.

B. Definition of controller Read/Write address

Registers

Register Type	Format		Read/Write Range		Data Length
		Word No.		Bit No.
General Parameters	GPn	n: 0 ~ 31		N/A	Double Word
Parameter Block for Slave 1	PB1_n	n: 0 ~ 31		N/A	Double Word
Parameter Block for Slave 2	PB2_n	n: 0 ~ 31		N/A	Double Word
Parameter Block for Slave 3	PB3_n	n: 0 ~ 31		N/A	Double Word
Parameter Block for Slave 4	PB4_n	n: 0	~ 31	N/A	Double Word
Process Data	PRODn	n: 0	~ 31	N/A	Double Word
Communication Settings	CSETn	n: 0	~ 31	N/A	Double Word
Setup Settings	STUPn	n: 0 ~ 31		N/A	Double Word
Status of Commands and	S_COn	n: 0	~ 4	N/A	Double Word
Outputs
Contacts

Contact type	Format
Commands	CMDb
Outputs	OUTb
Status of Commands and	S_COn.b
Outputs

Read/Write Range

Word No.	Bit No.
N/A	b: 0 ~ 31
N/A	b: 0 ~ 31
n: 0 ~ 4	b: 0 ~ 31

Revision January, 2008, Doc. Name: 2007PDD23000007 1-95