Delta DOP Series HMI Connection ManualDOP-A/AE/AS Series
¾CJ1M Models: An: A0-A477 is “read only”.
Contacts
Contact type | Format |
| Read/Write Range | |
| Word No. | Bit No. | ||
|
|
| ||
CIO area | CIOBnbb | n: 0 ~ 9999 | bb: 00 ~ 15 | |
|
|
|
| |
Hold area | HBnbb | n: 0 ~ 999 | bb: 00 ~ 15 | |
|
|
|
| |
Auxiliary area | ABnbb | n: 0 ~ 999 | bb: 00 ~ 15 | |
|
|
|
| |
DM area | DBnbb | n: 0 ~ 65535 | bb: 00 ~ 15 | |
|
|
|
| |
EM area | EBm.nbb | n: 0 ~ 65535 |
| |
|
| m: 0 ~ 12 (bank no.) | bb: 00 ~ 15 | |
|
|
|
|
|
Timer area | TBn | N/A |
| n: 0 ~ 9999 |
|
|
|
|
|
Counter area | CBn | N/A |
| n: 0 ~ 9999 |
|
|
|
| |
Work area | WBnbb | n: 0 ~ 999 | bb: 00 ~ 15 | |
|
|
|
| |
EM Current Bank area | EMBnbb | n: 0 ~ 65535 | bb: 00 ~ 15 | |
|
|
|
| |
Index Register | IRBnbb | n: 0 ~ 99 | bb: 00 ~ 31 | |
|
|
|
|
|
DR area | DRBnbb | n: 0 | ~ 99 | bb: 00 ~ 15 |
|
|
|
|
|
TK area | TKBnbb | n: 0 | ~ 1022 (Even | bb: 00 ~ 15 |
|
| No.) |
| |
NOTE
1) The following address cannot be written:
yIRn and DRn: It is not valid if the users write them. HMI will not show any error message if the write operation is done.
yAn and Abnbb: Some range of An and Abnbb (Auxiliary area) is “read only”.
yTKn / TKBnbb / TBn / CBn / EMBnbb / IRBnbb / DRBnbb: Writing these addresses is not allowed. If the write operation is done, the error will occur and display the error message “Command Can Not be Executed…” on the screen of HMI.
2)The unit of IR address is “Double Word”.
3)The unit of TK address is “Byte” and it should be even number.
Revision January, 2008, Doc. Name: 2007PDD23000007 |
