Delta Electronics DOP-A/AE/AS - page 18

Delta DOP Series HMI Connection Manual|DOP-A/AE/AS Series
Revision January, 2008, Doc. Name: 2007PDD23000007 1-17
AllenBradley SLC5 PLC Back to Table
A. HMI factory setting
Baud rate: 19200, 8, None, 1.
PLC station number: 1.
Control area/status area: B3:0/B3:10.
NOTE
1) Error Check uses CRC (Cyclical Redundancy Check).
B. Definition of controller Read/Write address
Registers
Read/Write Range
Word No. Bit No.
Low Byte High Byte
Register Type Format
Element No. Slot or File No.
Output File O:n
O:s.n
n: 0 ~ 30 N/A Slot No. s = 0
s: 0 ~ 255
File No. = 0
Input File I:n
I:s.n
n: 0 ~ 30 N/A Slot No. s = 0
s: 0 ~ 255
File No. = 1
Status File S2:n n: 0 ~ 255 N/A File No. = 2
Bit File Bf:n n: 0 ~ 255 N/A f: 10 ~ 255
If f is ignored, file no. will be
default setting 3.
Timer Flag Tf:n n: 0 ~ 255 N/A f: 10 ~ 255
If f is ignored, file no. will be
default setting 4.
Timer Preset Value Tf:n.PRE n: 0 ~ 255 N/A f: 10 ~ 255
If f is ignored, file no. will be
default setting 4.
Timer Accumulator Value Tf:n.ACC n: 0 ~ 255 N/A f: 10 ~ 255
If f is ignored, file no. will be
default setting 4.
Counter Flag Cf:n n: 0 ~ 255 N/A f: 10 ~ 255
If f is ignored, file no. will be
default setting 5.
Counter Preset Value Cf:n.PRE n: 0 ~ 255 N/A f: 10 ~ 255
If f is ignored, file no. will be
default setting 5.