9.2 Features

Features of the general USB Module include the following:

•Integrated 3.3 Volt Regulator with 3.3V Output Pin REGOUT

•Integrated USB transceiver supporting both full speed and low speed functions

•USB Data Control Logic

–Packet decoding/generation

–CRC generation and checking

–NRZI encoding/decoding

–Bit stuffing/de-stuffing

•USB reset support

•Suspend and resume operations

–Remote Wakeup support

•STALL, NAK, and ACK handshake generation

Features of the HUB function include the following:

• HUB Control Endpoint 0

– 8-byte transmit buffer

– 8-byte receive buffer

• HUB Interrupt Endpoint 1

– 1-byte transmit buffer

• USB interrupts

– transaction interrupt driven

– Start of Frame interrupt

– EOF2 interrupt

– End of Packet interrupt

– Signal transition interrupt

– Frame timer locked interrupt

• HUB repeater and controller function

– downstream and upstream connectivity

– bus state evaluation

 

–

selective reset, suspend and resume

 

–

fault condition hardware detection

Advance Information

 

MC68HC(7)08KH12 — Rev. 1.1

 

 

 

 

 

 

114

 

Freescale Semiconductor

Page 113 Page 115
Page 114
Image 114
Freescale Semiconductor MC68HC08KH12 manual Features, 114
Page 113 Page 115

MC68HC08KH12 specifications

The Freescale Semiconductor MC68HC08KH12 is a versatile microcontroller that has gained popularity in various embedded systems applications. Part of the HC08 family, this microcontroller combines a robust architecture with comprehensive on-chip features, making it suitable for a wide range of applications ranging from industrial control to consumer electronics.

One of the main features of the MC68HC08KH12 is its 8-bit architecture, which provides an optimal balance between performance and power efficiency. It operates at clock speeds of up to 2 MHz, allowing for efficient execution of instructions while maintaining low power consumption. The microcontroller is designed to operate over a voltage range of 2.7 to 5.5 volts, making it adaptable to various system requirements.

The MC68HC08KH12 is equipped with 1 Kbyte of RAM and 12 Kbytes of ROM, which allows for substantial program and data storage. The on-chip memory helps reduce the need for external components, simplifying the design of embedded systems and enhancing reliability. With a wide range of I/O options, including 26 general-purpose I/O pins, the microcontroller provides flexibility in interfacing with sensors, actuators, and other devices.

In terms of technologies, the MC68HC08KH12 features an advanced instruction set that enhances programming efficiency. It supports basic arithmetic operations, bit manipulation, and control transfer instructions, making it suitable for a variety of computational tasks. The integrated timers, analog-to-digital converters, and serial communication interfaces, including UART, provide the necessary tools for real-time control and data exchange with peripheral devices.

Another characteristic of the MC68HC08KH12 is its low power mode capabilities, which allow it to enter a sleep state during periods of inactivity. This feature is essential in battery-powered applications, where minimizing power consumption is crucial for extending operational life.

Overall, the Freescale Semiconductor MC68HC08KH12 stands out as a reliable microcontroller that combines performance, flexibility, and power efficiency. Its extensive features and technologies enable engineers to design robust embedded systems that meet the demands of modern applications. As a result, the MC68HC08KH12 remains a valuable choice for developers seeking a highly functional yet cost-effective microcontroller solution.
Top Page Image Contents