Advance Information — MC68HC(7)08KH12

Section 5. Configuration Register (CONFIG)

5.1 Contents

5.2Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

5.3Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

5.2 Introduction

This section describes the configuration register (CONFIG). The configuration register enables or disables the following options:

•Stop mode recovery time (32 CGMXCLK cycles or 4096 CGMXCLK cycles)

•STOP instruction

•Computer operating properly module (COP)

•COP reset period (COPRS), (213–24)⋅CGMXCLK or (218–24)⋅CGMXCLK

5.3Functional Description

The configuration register is used in the initialization of various options. The configuration register can be written once after each reset. All of the configuration register bits are cleared during reset. Since the various options affect the operation of the MCU it is recommended that this register be written immediately after reset. The configuration register is located at $001F. The configuration register may be read at anytime.

This configuration register exists on both the MC68HC708KH12 (OTP part) and MC68HC08KH12 (ROM part).

MC68HC(7)08KH12 — Rev. 1.1

Advance Information

 

 

Freescale Semiconductor

49

Page 48 Page 50
Page 49
Image 49
Freescale Semiconductor MC68HC08KH12 manual Configuration Register Config
Page 48 Page 50

MC68HC08KH12 specifications

The Freescale Semiconductor MC68HC08KH12 is a versatile microcontroller that has gained popularity in various embedded systems applications. Part of the HC08 family, this microcontroller combines a robust architecture with comprehensive on-chip features, making it suitable for a wide range of applications ranging from industrial control to consumer electronics.

One of the main features of the MC68HC08KH12 is its 8-bit architecture, which provides an optimal balance between performance and power efficiency. It operates at clock speeds of up to 2 MHz, allowing for efficient execution of instructions while maintaining low power consumption. The microcontroller is designed to operate over a voltage range of 2.7 to 5.5 volts, making it adaptable to various system requirements.

The MC68HC08KH12 is equipped with 1 Kbyte of RAM and 12 Kbytes of ROM, which allows for substantial program and data storage. The on-chip memory helps reduce the need for external components, simplifying the design of embedded systems and enhancing reliability. With a wide range of I/O options, including 26 general-purpose I/O pins, the microcontroller provides flexibility in interfacing with sensors, actuators, and other devices.

In terms of technologies, the MC68HC08KH12 features an advanced instruction set that enhances programming efficiency. It supports basic arithmetic operations, bit manipulation, and control transfer instructions, making it suitable for a variety of computational tasks. The integrated timers, analog-to-digital converters, and serial communication interfaces, including UART, provide the necessary tools for real-time control and data exchange with peripheral devices.

Another characteristic of the MC68HC08KH12 is its low power mode capabilities, which allow it to enter a sleep state during periods of inactivity. This feature is essential in battery-powered applications, where minimizing power consumption is crucial for extending operational life.

Overall, the Freescale Semiconductor MC68HC08KH12 stands out as a reliable microcontroller that combines performance, flexibility, and power efficiency. Its extensive features and technologies enable engineers to design robust embedded systems that meet the demands of modern applications. As a result, the MC68HC08KH12 remains a valuable choice for developers seeking a highly functional yet cost-effective microcontroller solution.
Top Page Image Contents