Freescale Semiconductor MC68HC08KH12 manual

POR — Power-On Reset Bit

1 = Last reset caused by POR circuit

0 = Read of RSR

PIN — External Reset Bit

1 = Last reset caused by external reset pin (RST) 0 = POR or read of RSR

COP — Computer Operati ng Properly Reset Bit 1 = Last reset caused by COP counter

0 = POR or read of RSR

ILOP — Illegal Opcode Reset Bit

1 = Last reset caused by an illegal opcode

0 = POR or read of RSR

ILAD — Illegal Address Reset Bit (opcode fetches only)

1 = Last reset caused by an opcode fetch from an illegal address

0 = POR or read of RSR

USB —Universal Serial Bus Reset Bit

1 = Last reset caused by an USB module

0 = POR or read of RSR

7.8.3 Break Flag Control Register (BFCR)

The break control register contains a bit that enables software to clear

status bits while the MCU is in a break state.

Address:

Read:

Write:

Reset:

$FE03
Bit 7	6	5	4	3	2	1	Bit 0

BCFE	R	R	R	R	R	R	R

0	0	0	0	0	0	0	0

R	= Reserved

Figure 7-22. Break Flag Control Register (BFCR)

MC68HC(7)08KH12 — Rev. 1.1	Advance Information

Freescale Semiconductor	85

MC68HC08KH12 specifications

The Freescale Semiconductor MC68HC08KH12 is a versatile microcontroller that has gained popularity in various embedded systems applications. Part of the HC08 family, this microcontroller combines a robust architecture with comprehensive on-chip features, making it suitable for a wide range of applications ranging from industrial control to consumer electronics.

One of the main features of the MC68HC08KH12 is its 8-bit architecture, which provides an optimal balance between performance and power efficiency. It operates at clock speeds of up to 2 MHz, allowing for efficient execution of instructions while maintaining low power consumption. The microcontroller is designed to operate over a voltage range of 2.7 to 5.5 volts, making it adaptable to various system requirements.

The MC68HC08KH12 is equipped with 1 Kbyte of RAM and 12 Kbytes of ROM, which allows for substantial program and data storage. The on-chip memory helps reduce the need for external components, simplifying the design of embedded systems and enhancing reliability. With a wide range of I/O options, including 26 general-purpose I/O pins, the microcontroller provides flexibility in interfacing with sensors, actuators, and other devices.

In terms of technologies, the MC68HC08KH12 features an advanced instruction set that enhances programming efficiency. It supports basic arithmetic operations, bit manipulation, and control transfer instructions, making it suitable for a variety of computational tasks. The integrated timers, analog-to-digital converters, and serial communication interfaces, including UART, provide the necessary tools for real-time control and data exchange with peripheral devices.

Another characteristic of the MC68HC08KH12 is its low power mode capabilities, which allow it to enter a sleep state during periods of inactivity. This feature is essential in battery-powered applications, where minimizing power consumption is crucial for extending operational life.

Overall, the Freescale Semiconductor MC68HC08KH12 stands out as a reliable microcontroller that combines performance, flexibility, and power efficiency. Its extensive features and technologies enable engineers to design robust embedded systems that meet the demands of modern applications. As a result, the MC68HC08KH12 remains a valuable choice for developers seeking a highly functional yet cost-effective microcontroller solution.

Freescale Semiconductor MC68HC08KH12 manual Break Flag Control Register Bfcr

Models: MC68HC08KH12

Figure 7-22. Break Flag Control Register (BFCR)

MC68HC08KH12 specifications