CHAPTER 7 8-BIT PWM TIMER

●While the PWM timer is operating:

Specify the "H" level width of a pulse in the register to which the value that is compared with the counter value is to be set.

Until the settings written to this register match the counter value, "H" is output from the PWM pin. When a match is found, "L" is output until the counter value overflows.

If a value is written to the COMR register while the counter is operating, the value takes effect at the next cycle (after overflow).

Note:

The settings and cycle of the COMR register, while the PWM timer is operating, can be calculated using the following formula. The gear function, however, affects the instruction cycle.

COMR register value = duty ratio (%) ⋅ 256

PWM wave cycle = count clock cycle ⋅ instruction cycle ⋅ 256

146

Page 161 Page 163
Page 162
Image 162
Fujitsu MB89202, F202RA manual While the PWM timer is operating, 146
Page 161 Page 163

F202RA, MB89202 specifications

The Fujitsu MB89202 and F202RA microcontrollers are part of the 16-bit microcontroller family, renowned for their robust performance and versatility in a variety of embedded system applications. These devices are tailored for high-efficiency operation across diverse industries, including automotive, consumer electronics, and industrial automation.

One of the main features of the MB89202 is its powerful CPU core, which operates at a clock speed of up to 20 MHz. This enables the microcontroller to perform complex calculations and consumer-grade applications seamlessly. The architecture is designed to handle multiple tasks effectively, making it suitable for real-time operations.

Memory capacity is a vital characteristic of the MB89202, featuring on-chip RAM and ROM configurations. The microcontroller can accommodate different memory variants, providing developers with flexibility in memory allocation based on their application requirements. This adaptability facilitates applications ranging from simple control systems to complex data processing tasks.

The F202RA variant extends the capabilities of the MB89202 by integrating advanced peripheral functions. It includes built-in timers, A/D converters, and serial communication interfaces, which are essential for interfacing with other hardware components or sensors. The availability of these peripherals reduces the need for additional external circuits, thus contributing to a more compact and cost-effective design.

In terms of power management, the MB89202 series employs advanced power-saving technologies. The microcontroller offers various low-power modes, enabling devices to conserve energy during idle times, making it highly suitable for battery-operated applications. This characteristic not only enhances the efficiency of devices but also extends their operational lifespan.

Moreover, the Fujitsu MB89202 series incorporates robust protection features, including watchdog timers and failure detection mechanisms. These safety features ensure reliable operation in critical systems, making them a preferred choice in applications where failure is not an option.

The MB89202 and F202RA microcontrollers also support a range of development tools and environments, including integrated development environments (IDEs) and software libraries, which facilitate rapid application development. With these tools, developers can efficiently prototype, debug, and optimize their applications.

In summary, the Fujitsu MB89202 and F202RA microcontrollers stand out with their efficient performance, extensive memory options, integrated peripherals, and power-saving capabilities, making them ideal for a wide array of embedded applications. Their reliability and robustness further enhance their attractiveness for designers seeking advanced microcontroller solutions.
Top Page Image Contents