CHAPTER 10 EXTERNAL INTERRUPT CIRCUIT 1 (EDGE)

Table 10.4-1 Explanation of Functions of Each Bit in External Interrupt Control Register 1 (EIC1) (2/2)

 

Bit name

Function

 

 

 

 

 

 

 

This bit enables or disables interrupt request outputs to the CPU. When this bit and

 

 

 

external interrupt request flag bit 0 (EIR0) are "1", the interrupt request is output.

 

 

 

Notes:

 

 

EIE0:

• When using the external interrupt pin, write "0" for bit4 of the port data direction

bit0

 

Interrupt request

register (DDR3) so that the pin serves inputs only. Write "0" for bit1 of the timer

 

 

enable bit 0

output control register (TCR2) for the 8/16-bit capture timer/counter to set the

 

 

 

port input function on.

 

 

 

• Regardless of the interrupt request enable bit state, the state of the external

 

 

 

interrupt pin can be read directly from the port data register (PDR3).

 

 

 

 

234

Page 249 Page 251
Page 250
Image 250
Fujitsu MB89202, F202RA manual EIE0, 234
Page 249 Page 251

F202RA, MB89202 specifications

The Fujitsu MB89202 and F202RA microcontrollers are part of the 16-bit microcontroller family, renowned for their robust performance and versatility in a variety of embedded system applications. These devices are tailored for high-efficiency operation across diverse industries, including automotive, consumer electronics, and industrial automation.

One of the main features of the MB89202 is its powerful CPU core, which operates at a clock speed of up to 20 MHz. This enables the microcontroller to perform complex calculations and consumer-grade applications seamlessly. The architecture is designed to handle multiple tasks effectively, making it suitable for real-time operations.

Memory capacity is a vital characteristic of the MB89202, featuring on-chip RAM and ROM configurations. The microcontroller can accommodate different memory variants, providing developers with flexibility in memory allocation based on their application requirements. This adaptability facilitates applications ranging from simple control systems to complex data processing tasks.

The F202RA variant extends the capabilities of the MB89202 by integrating advanced peripheral functions. It includes built-in timers, A/D converters, and serial communication interfaces, which are essential for interfacing with other hardware components or sensors. The availability of these peripherals reduces the need for additional external circuits, thus contributing to a more compact and cost-effective design.

In terms of power management, the MB89202 series employs advanced power-saving technologies. The microcontroller offers various low-power modes, enabling devices to conserve energy during idle times, making it highly suitable for battery-operated applications. This characteristic not only enhances the efficiency of devices but also extends their operational lifespan.

Moreover, the Fujitsu MB89202 series incorporates robust protection features, including watchdog timers and failure detection mechanisms. These safety features ensure reliable operation in critical systems, making them a preferred choice in applications where failure is not an option.

The MB89202 and F202RA microcontrollers also support a range of development tools and environments, including integrated development environments (IDEs) and software libraries, which facilitate rapid application development. With these tools, developers can efficiently prototype, debug, and optimize their applications.

In summary, the Fujitsu MB89202 and F202RA microcontrollers stand out with their efficient performance, extensive memory options, integrated peripherals, and power-saving capabilities, making them ideal for a wide array of embedded applications. Their reliability and robustness further enhance their attractiveness for designers seeking advanced microcontroller solutions.
Top Page Image Contents