CHAPTER 4 I/O PORTS

4.5Port 5

Port 5 is a general-purpose I/O port and may also serve the input/output for peripherals. The pins of this port can be used for peripherals or normal port function that can be selected according to the setting of the bit corresponding to the pin on a specific register.

This section explains the general-purpose I/O function of the port.

This section also describes port 5 concerning to the structure, pins, a block diagram of pins, and associated registers.

Structure of Port 5

Port 5 comprises the following four elements:

General-purpose I/O pins (P50/PWM)

Port 5 data register (PDR5)

Port 5 data direction register (DDR5)

Port 5 pull-up setting register (PUL5)

Pins of Port 5

Port 5 has one CMOS I/O pin.

Table 4.5-1provides information on the pin of port 5.

Table 4.5-1

Pin of Port 5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Port

 

 

 

 

Peripherals for which the

Input and output

Circuit

 

Pin name

 

Function

 

form

name

 

 

pin may serve

 

 

 

type

 

 

 

 

Input

 

Output

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Port 5

 

P50/PWM

 

P50 general-

PWM (8-bit PWM/timer

CMOS

 

CMOS

E

 

 

purpose I/O

output)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For circuit type, see Section "1.7 Pin Functions Description " and "1.8 I/O Circuit Types ".

94

Page 110
Image 110
Fujitsu MB89202, F202RA manual Pin of Port, Input and output Circuit Pin name Function Form, Pin may serve Type Input Output

F202RA, MB89202 specifications

The Fujitsu MB89202 and F202RA microcontrollers are part of the 16-bit microcontroller family, renowned for their robust performance and versatility in a variety of embedded system applications. These devices are tailored for high-efficiency operation across diverse industries, including automotive, consumer electronics, and industrial automation.

One of the main features of the MB89202 is its powerful CPU core, which operates at a clock speed of up to 20 MHz. This enables the microcontroller to perform complex calculations and consumer-grade applications seamlessly. The architecture is designed to handle multiple tasks effectively, making it suitable for real-time operations.

Memory capacity is a vital characteristic of the MB89202, featuring on-chip RAM and ROM configurations. The microcontroller can accommodate different memory variants, providing developers with flexibility in memory allocation based on their application requirements. This adaptability facilitates applications ranging from simple control systems to complex data processing tasks.

The F202RA variant extends the capabilities of the MB89202 by integrating advanced peripheral functions. It includes built-in timers, A/D converters, and serial communication interfaces, which are essential for interfacing with other hardware components or sensors. The availability of these peripherals reduces the need for additional external circuits, thus contributing to a more compact and cost-effective design.

In terms of power management, the MB89202 series employs advanced power-saving technologies. The microcontroller offers various low-power modes, enabling devices to conserve energy during idle times, making it highly suitable for battery-operated applications. This characteristic not only enhances the efficiency of devices but also extends their operational lifespan.

Moreover, the Fujitsu MB89202 series incorporates robust protection features, including watchdog timers and failure detection mechanisms. These safety features ensure reliable operation in critical systems, making them a preferred choice in applications where failure is not an option.

The MB89202 and F202RA microcontrollers also support a range of development tools and environments, including integrated development environments (IDEs) and software libraries, which facilitate rapid application development. With these tools, developers can efficiently prototype, debug, and optimize their applications.

In summary, the Fujitsu MB89202 and F202RA microcontrollers stand out with their efficient performance, extensive memory options, integrated peripherals, and power-saving capabilities, making them ideal for a wide array of embedded applications. Their reliability and robustness further enhance their attractiveness for designers seeking advanced microcontroller solutions.