CHAPTER 17 FLASH MEMORY

17.2Flash Memory Control Status Register (FMCS)

The flash memory control status register (FMCS), together with the flash memory interface circuit, is used to write data to and erase data from the flash memory.

■Flash Memory Control Status Register (FMCS)

Figure 17.2-1 Flash Memory Control Status Register (FMCS)

Address

bit7

bit6

bit5

bit4 bit3 bit2 bit1 bit0

0079H

INTE

RDYINT

WE

RDY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R/W

R/W

R/W

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Initial value

000X----B

tINST : Instruction cycle R/W : Readable/Writable

R: Read only

: Initial value

 

 

 

Unused bit

 

 

 

 

 

 

Reading / Writing has no effect.

 

 

 

 

RDY

ReaDY bit

(for enabling data to be written into/erased from flash memory)

 

 

 

 

0

 

Data is being written or erased.

1Data writing/erasing has been completed. (Subsequent data can be written/erased.)

WE

Write enable bit

0Disables data to be written into/erased from flash memory.

1Enables data to be written into/erased from flash memory.

RDYINT

Flash memory operation state indication bit

 

 

0

Data is being written/erased.

1

Data writing/erasing has been completed.

(An interrupt request is generated.)

 

 

 

INTE

Causing an interrupt to the CPU to be generated bit

0Enables an interrupt when data writing/erasing is completed.

1Disables an interrupt when data writing/erasing is completed.

359

Page 374 Page 376
Page 375
Image 375
Fujitsu F202RA, MB89202 manual Flash Memory Control Status Register Fmcs
Page 374 Page 376

F202RA, MB89202 specifications

The Fujitsu MB89202 and F202RA microcontrollers are part of the 16-bit microcontroller family, renowned for their robust performance and versatility in a variety of embedded system applications. These devices are tailored for high-efficiency operation across diverse industries, including automotive, consumer electronics, and industrial automation.

One of the main features of the MB89202 is its powerful CPU core, which operates at a clock speed of up to 20 MHz. This enables the microcontroller to perform complex calculations and consumer-grade applications seamlessly. The architecture is designed to handle multiple tasks effectively, making it suitable for real-time operations.

Memory capacity is a vital characteristic of the MB89202, featuring on-chip RAM and ROM configurations. The microcontroller can accommodate different memory variants, providing developers with flexibility in memory allocation based on their application requirements. This adaptability facilitates applications ranging from simple control systems to complex data processing tasks.

The F202RA variant extends the capabilities of the MB89202 by integrating advanced peripheral functions. It includes built-in timers, A/D converters, and serial communication interfaces, which are essential for interfacing with other hardware components or sensors. The availability of these peripherals reduces the need for additional external circuits, thus contributing to a more compact and cost-effective design.

In terms of power management, the MB89202 series employs advanced power-saving technologies. The microcontroller offers various low-power modes, enabling devices to conserve energy during idle times, making it highly suitable for battery-operated applications. This characteristic not only enhances the efficiency of devices but also extends their operational lifespan.

Moreover, the Fujitsu MB89202 series incorporates robust protection features, including watchdog timers and failure detection mechanisms. These safety features ensure reliable operation in critical systems, making them a preferred choice in applications where failure is not an option.

The MB89202 and F202RA microcontrollers also support a range of development tools and environments, including integrated development environments (IDEs) and software libraries, which facilitate rapid application development. With these tools, developers can efficiently prototype, debug, and optimize their applications.

In summary, the Fujitsu MB89202 and F202RA microcontrollers stand out with their efficient performance, extensive memory options, integrated peripherals, and power-saving capabilities, making them ideal for a wide array of embedded applications. Their reliability and robustness further enhance their attractiveness for designers seeking advanced microcontroller solutions.
Top Page Image Contents