CHAPTER 4 I/O PORTS

●Operation in stop mode

When the pin state setting bit of the standby control register (STBC: SPL) is "1" and when the stop mode is

entered, the output transistor is turned OFF and the pin becomes Hi-Z because the output transistor is

forcibly turned OFF without respect to the value existing on the DDR0 register in the bit position

corresponding to the pin.

Input remains fixed to prevent leaks by input open.

Table 4.2-4summarizes the operating modes of the pins of port 0.

Table 4.2-4 Operating Modes of Pins of Port 0

Pin name

Normal operation, sleep, stop (SPL = 0)

Stop (SPL = 1)

At a reset

 

 

 

 

 

 

 

 

 

 

 

 

 

 

P00/INT20/AN4

General-purpose I/O port may also serve

 

 

 

 

to

 

 

 

 

external interrupt inputs or analog inputs

 

 

 

 

 

 

 

 

 

P03/INT23/AN7

Hi-Z

Hi-Z

 

 

 

 

 

 

 

 

 

 

 

 

 

(External interrupt input)

P04/INT24

General-purpose I/O port may also serve

 

 

 

 

 

to

 

 

 

 

external interrupt inputs

 

 

 

 

 

 

 

 

 

P07/INT27

 

 

 

 

 

 

 

 

 

SPL : Pin state setting bit of standby control register (STBC: SPL)

 

 

Hi-Z: High impedance

 

 

 

Note:

When the pull-up resistor is selected by using the pull-up setting register, the pin state will be "H" level instead of Hi-Z in stop mode (SPL = 1). During a reset, however, the pull-up is invalid with the pin remaining at Hi-Z.

83

Page 98 Page 100
Page 99
Image 99
Fujitsu F202RA, MB89202 manual Operation in stop mode
Page 98 Page 100

F202RA, MB89202 specifications

The Fujitsu MB89202 and F202RA microcontrollers are part of the 16-bit microcontroller family, renowned for their robust performance and versatility in a variety of embedded system applications. These devices are tailored for high-efficiency operation across diverse industries, including automotive, consumer electronics, and industrial automation.

One of the main features of the MB89202 is its powerful CPU core, which operates at a clock speed of up to 20 MHz. This enables the microcontroller to perform complex calculations and consumer-grade applications seamlessly. The architecture is designed to handle multiple tasks effectively, making it suitable for real-time operations.

Memory capacity is a vital characteristic of the MB89202, featuring on-chip RAM and ROM configurations. The microcontroller can accommodate different memory variants, providing developers with flexibility in memory allocation based on their application requirements. This adaptability facilitates applications ranging from simple control systems to complex data processing tasks.

The F202RA variant extends the capabilities of the MB89202 by integrating advanced peripheral functions. It includes built-in timers, A/D converters, and serial communication interfaces, which are essential for interfacing with other hardware components or sensors. The availability of these peripherals reduces the need for additional external circuits, thus contributing to a more compact and cost-effective design.

In terms of power management, the MB89202 series employs advanced power-saving technologies. The microcontroller offers various low-power modes, enabling devices to conserve energy during idle times, making it highly suitable for battery-operated applications. This characteristic not only enhances the efficiency of devices but also extends their operational lifespan.

Moreover, the Fujitsu MB89202 series incorporates robust protection features, including watchdog timers and failure detection mechanisms. These safety features ensure reliable operation in critical systems, making them a preferred choice in applications where failure is not an option.

The MB89202 and F202RA microcontrollers also support a range of development tools and environments, including integrated development environments (IDEs) and software libraries, which facilitate rapid application development. With these tools, developers can efficiently prototype, debug, and optimize their applications.

In summary, the Fujitsu MB89202 and F202RA microcontrollers stand out with their efficient performance, extensive memory options, integrated peripherals, and power-saving capabilities, making them ideal for a wide array of embedded applications. Their reliability and robustness further enhance their attractiveness for designers seeking advanced microcontroller solutions.
Top Page Image Contents