HP 1100dtn To print envelopes from the envelope slot Mac OS, To load envelopes or cards in Tray

To print envelopes from the envelope slot (Mac OS)

1On the File menu, click Page Setup.

2In the Page Size pull-down menu, select the envelope size.

3Change any other settings and click OK.

4On the File menu, click Print and click OK.

5When the Resume light on the printer blinks, insert one envelope with the flap facing upwards into envelope slot. Ease the envelope or card to the right edge.

6Press the (resume button) on the printer to continue printing.

To load envelopes or cards in Tray 1

1Lift the output tray and remove all media from the tray. Insert the stack of cards or envelopes into the tray with the flaps facing up and to the right.

2Slide the paper width and length guides in until they stop at the edges of the envelopes or cards.

3Lower the output tray. Go to “To print envelopes or cards from Tray 1 (Windows)”or “To print envelopes or cards from Tray 1 (Mac OS 8.6 to OS X)”.

To print envelopes or cards from Tray 1 (Windows)

1On the File menu, click Print, and then click Properties. (The actual steps can vary; this is the most common method.)

2On the Paper/Quality tab, select the paper type you are using in the Type is box (for example, HP Glossy Greeting Card Paper).

3Select the envelope or card size from the Size is menu.

4Change any other print settings, if necessary, and then click OK.

5Send your job to print.

To print envelopes or cards from Tray 1 (Mac OS 8.6 to OS X)

1On the File menu, click Page Setup.

2On the Layout panel, select the size from the Paper Size pull-down menu.

3Change any other settings and click OK.

4On the File menu, click Print.

5On the Paper Type/Quality panel, select the paper type you are using from the Group pull-down menu (such as Greeting Cards).

ENWW 2-17