Light pattern

Light description

Explanation and recommended

 

 

action

 

The Power light is on and

The printer is out of paper.

 

the Resume light blinks.

z Load paper and then press the

 

 

(resume button).

The printer is in manual duplex mode. It is waiting for the ink to dry so the pages can be flipped over and reloaded.

z Reload the stack into the printer and press the (resume button).

The printer is pausing for the ink to dry. z Wait for the ink to dry. The Resume

light will stop blinking.

The printer has printed a banner, and the banner needs to be removed from the printer.

z Press the (resume button) to remove the banner from the printer.

The auto-duplex unit is not installed. The printer cannot print without it installed. z Install the auto-duplex unit, and then

press the (resume button).

The Power light and

Print media is jammed in the printer.

Resume light blink.

z Press the

(resume button) to

 

eject the jammed media.

z Remove all media from the output tray. Open the top cover to locate the jam. After clearing the jam, press the (resume button) to continue the print job.

 

 

 

 

 

 

 

 

 

 

 

The Power light blinks and

One or more covers on the printer are

 

 

 

 

 

 

 

 

 

 

 

the Resume light is on.

open.

 

 

 

 

 

 

 

 

 

 

 

 

z Close any open covers.

 

 

 

 

 

 

 

 

 

 

 

 

z Make sure the auto-duplex unit is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

properly installed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A printer error has occurred.

 

 

 

 

 

 

 

 

 

 

 

 

z Turn the printer off and then on

 

 

 

 

 

 

 

 

 

 

 

 

again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Power light blinks and

The printhead latch is not secured.

 

 

 

 

 

 

 

 

 

 

 

the Printhead and Resume

z Open the printing supplies cover and

 

 

 

 

 

 

 

 

 

 

 

light are on.

secure the printhead latch.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Printhead light, a color indicator light, and the Resume light are on.

One or more of the printheads needs attention.

zReinstall the printheads and try to print.

zTry cleaning the printhead contacts. See “Cleaning the printhead contacts”.

zIf the error persists, replace the printhead or printheads indicated.

5-2

ENWW

Page 76
Image 76
HP 1100dtn manual Light pattern Light description