Performing automatic duplexing
When printing is complete on one side of the paper, the printer holds the paper and pauses while the ink dries. Once the ink is dry, the paper is pulled back into the printer and the second side of the paper is printed. When printing is complete, the paper is dropped on to the output tray.
For more information on setting print options, see “Changing printer settings”.
To perform automatic duplexing (Windows)
1Load the appropriate paper in Tray 1 or Tray 2. Be sure to load the paper with the print side up.
2On the File menu, click Print, and then click Properties. (The actual steps can vary; this is the most common method.)
3On the Finishing tab, select the Print on Both Sides check box. Make sure that the Automatic check box is selected.
4When duplexing, the top margin might need to be increased slightly to make sure the pages align. Select the Preserve Layout check box to reduce the margins so that the page prints on a single sheet. Clear this check box if you prefer that the page print on more than one sheet with full margins.
5Select or clear the Flip Pages Up check box depending on which way you want the binding. See the graphics in the printer driver for examples.
6Click OK to close the dialog box.
7Click OK to print.
To perform automatic duplexing (Mac OS 8.6 to 9.x)
1Load the appropriate paper in Tray 1 or Tray 2. Be sure to load the paper with the print side down.
2On the File menu, click Print.
3On the Layout panel, select the Print Both Sides check box, select the binding orientation you want (select the desired icon), and select Automatic.
4Click OK.
To perform automatic duplexing (Mac OS X)
1Load the appropriate paper in Tray 1 or Tray 2. Be sure to load the paper with the print side up.
2On the File menu, click Print.
3On the Two Sided Printing panel, select the Print Both Sides check box, the binding orientation you want (select the desired icon), and select Automatic.
4Print the document.
ENWW |
