Note
Note
6In the Type
7Change any other settings if necessary, then click OK.
Printing on transparencies
You can print transparencies from Tray 1. For best results, use HP Premium Plus Inkjet Transparency Film, which is specifically designed to work with the printer, or other transparency film that is designed for inkjet printers.
To load transparencies
1Remove all media from Tray 1. Insert the transparencies with the rough side down and the adhesive strip pointing forward.
2Slide the width and length guides until they stop at the edge of the transparencies. Slide the tray back into its closed and locked position.
To print transparencies (Windows)
1On the File menu, click Print, and then click Properties. (The actual steps can vary; this is the most common method.)
2On the Paper/Quality tab, under Print Quality, select Best in the
Use Best mode to print transparencies. Because this mode provides a longer drying time, it ensures that the ink dries completely before the next page is delivered to the output tray.
3Under Type is, select Transparency Films.
4Under Size is, select the appropriate size for the transparency you are printing.
5Change any other print settings, if necessary, and then click OK.
6Send your job to print.
7Remove each sheet of media as it prints and set aside to dry. Allowing wet media to stack up may cause smearing.
To print transparencies (Mac OS 8.6 to 9.x)
1On the File menu, click Page Setup.
2In the Page Size
3On the File menu, click Print.
4On the Paper Type/Quality panel, select Transparency Film from the Group
5In the Type
6Click the Quality tab and select Best.
Use Best mode to print transparencies. This mode provides a longer drying time and ensures that the ink dries completely before the next page exits the printer.
7Change any other print settings if necessary, then click OK.
8Remove each sheet of media as it prints and set aside to dry. Allowing wet media to stack up might cause smearing.
| ENWW |
