&￿￿￿ ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

OPTION ACCESSIBILITY: Through any serial computer port.

By responding to the Enter Request: message at the end of the main configuration menu (see Section 8.1) with capital "C" for any serial module or capital "B" for the M24SII-V02 high speed parallel module (Program Default Printer Assignment), you may configure Default Printer Assignment for each individual computer port. The Default Printer Assignment consists of the module number and port number the desired printer is connected to. After initial power-up, if a particular computer sends a print job without a port select sequence, the print job will automatically be routed to the default printer module/port.

NOTE: The Default Printer Assignment for printer ports will be the module number and port number the printer is connected to on the Model 24SII DES.

The Model 24SII DES will respond with:

Enter Request :C

 

 

 

 

 

 

 

--------------------------------------------------

Port

Logical Name

Port

Port

Prnt

 

Type

Desig

Assn

--------------------------------------------------

1

Device A

Serial Computer

0

2

Device B

Serial Printer

1-2

3

Device C

Serial Computer

0

4

Device D

Serial Computer

0

--------------------------------------------------

Enter

Port Number (ENTER=Exit) :

 

 

 

 

 

Enter the number of the computer port for which you wish to change the Default Printer Assignment. For example, if you enter "3" for Port 3, the Model 24SII DES will respond with:

Default Module is 0

Enter New Value (0 to 6), or ENTER for no change :

￿￿