HP 24SII manual Enter Port Number ENTER=Exit

&￿) ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿"￿￿￿￿￿￿￿￿￿￿￿

OPTION ACCESSIBILITY: Through any serial computer port.

By responding to the Enter Request: message at the end of the main configuration menu (see Section 8.1) with "7" for any serial module or "6" for the M24SII-V02 high speed parallel module (Set Input Inactivity Timeout), you may set the disconnect timeout. The Model 24SII DES will automatically disconnect the computer and printer if no characters are received from the computer for the specified timeout period.

The Model 24SII DES will respond with:

Enter Request :7

------------------------------------------

Port	Logical Name	Timeout Port
	(Computer)	in sec Sel Mode

------------------------------------------

1	Device A		20	Anytime
3	Device	C	20	Anytime
4	Device	D	20	Anytime

------------------------------------------

Enter Port Number (ENTER=Exit) :

Enter the number of the computer port for which you wish to set the Input Inactivity Timeout and then strike the Enter key. For example, if you entered "3" and Enter, the Model 24SII DES will respond with:

------------------------------------------

	Port	Logical Name	Timeout Port
		(Computer)	in sec Sel Mode
------------------------------------------

3 Device C	20 Anytime
------------------------------------------
Input Inactivity Timeout is		20	Seconds
Enter NeIw Value (0 to 200),		or	ENTER for no change :

Enter the number of timeout seconds that you wish from 0 to 200, followed by Enter.

￿￿