HP 24SII manual Program Port Logical Name

NOTE: If you happen to be configuring a M24SII-V02 high speed parallel module, the main configuration menu is different from the one shown on the previous page.

The Model 24SII DES will respond to the receiving of Control-T, capital C, and the M24SII-V02 module number with the following menu:

Copyright (c) Bay Technical Associates, 1992

Model 24SII Data Exchange System Rev. 2.02

Total memory 1M

This Module is 1
Status	1
Program Port Logical Name		2
Set Number of Printers		3
Program Port Select Code		4
Set Port Select Mode		5
Set Input Inactivity Timeout		6
Enable/Disable Form Feed Mode		7
Program I.D. Page Message		8
Enable/Disable I.D. Page Message		9
Select Print Schedule for I.D. Page		A
Program Default Printer Assignment		B
Exit Configuration	X

We will make special notes at the beginning of certain configuration subsections if that subsection does not apply to the M24SII-V02 high speed parallel module or if that subsection pertains exclusively to this module.

￿￿