&
The Model 24SII DES has four Form Feed Modes allowing you to determine when form feed occurs at the printers you are selecting: at the beginning of printing, at the end of printing, or both. This feature is useful when sending DOS files to a laser printer.
Factory default is no form feed.
)
You can print a programmable message and the Logical Name of the source computer on a separate sheet of paper before or after printing any other data. You can enable or disable the I.D. Page Message and whether you want it to print before or after the print job. This page prints in addition to the form feed. The I.D. Page Message is useful for identifying various users' print jobs in the event you have several people printing to the same printer frequently, such as in a classroom environment.
Factory default is: "This print job is for:", with the I.D. message disabled.
#
Individual computer ports may be configured to have print jobs sent to a specific default printer port automatically. The Default Printer Assignment consists of the module number (1 to 6) and the port number (1 to 4) that the printer is physically connected to on the Model 24SII DES. The Default Printer Assignment may be set to 0 for contention mode in which case all print jobs sent from the particular computer will be sent to the first available printer.
Any print job sent without a port select sequence preceding it will | |
| |
automatically go to the default printer port upon initial |
|
Factory default is 0 for contention mode. |
|
