HP 24SII manual Xon/Xoff

Model 24SII DES CONFIGURATION GUIDE

Menu Options

Factory Default

User Options

Notes

￿￿

	Word Size: 8		460.8k		different serial protocols
	Stop Bits: 1		Word Size: 7 or 8 bits		and will do serial/parallel
			Stop Bits: 1 or 2		conversions.
	Parity: none
			Parity: even, odd, none
	XON/XOFF
	Xmit: off		XON/XOFF: enabled or
	XON/XOFF		disabled individually for		XON/XOFF for Xmit should
			transmit and receive		always be set to OFF
	Recv: off				when sending graphics or
					binary data.
	Printer		Printer Sharing Mode may		Programmable for high
	Sharing Mode:		be unidirectional or		speed serial modules only.
		bidirectional	bidirectional			Max baud rate using
					bidirectional is 115.2K bps,
					max baud rate using
					unidirectional is 460.8K
					bps.
	4-Wire/8-Wire				Programmable for the
	Operation: 8-		4-Wire/8-Wire Operation		M24SII-V07 high speed
	wire		may be set to 4-wire or 8-		module only.
			wire
Set Input
		20 seconds		0 to 200 seconds		A long timeout setting for a
Inactivity						PC will prevent other PCs
Timeout						from accessing the port it
						is connected to, while
						allowing the connected PC
						to send numerous print
						jobs. If you do not want to
						wait a long time between
						various users print jobs, it
						is suggested that you send
						a disconnect code at the
						end of the print job to
						override the timeout.
						A longer timeout may be
						required when sending
						large text files, graphics
						files, or downloading fonts.
						A zero will disable the
						Input Inactivity Timeout
						and the end of a print job
						will occur only when codes
						are manually entered and
						sent from the connected
						PC.
						WARNING: Do not set
						timeout to zero seconds
						when Port Select Mode B