&
OPTION ACCESSIBILITY: Through any serial computer port.
By responding to the Enter Request: message at the end of the main configuration menu (see Section 8.1) with "2" (Program Port Logical Name), you may enter a logical or identifying name for each device connected to the selected module. These Logical Names appear in the configuration menus and also in the I.D. Page Message if it is enabled.
The Model 24SII DES will respond with:
Enter Request :2
Port | Logical Name | Port | Port | Prnt | |||||
| Type | Desig | Assn | ||||||
1 | Device A | Serial Computer | 0 | ||||||
2 | Device B | Serial Printer | |||||||
3 | Device C | Serial Computer | 0 | ||||||
4 | Device D | Serial Computer | 0 | ||||||
Enter | Port Number (ENTER=Exit) : |
|
|
|
|
| |||
You should now enter the port number of the device for which you wish to program a new Logical Name and then strike the Enter key. For example, if you entered "1" and Enter for Port 1, the Model 24SII DES will respond with:
Port | Logical Name | Port | Port | Prnt | |||
| Type | Desig | Assn |
1 Device A Serial Computer 0
Enter Logical Name (Max. 8 Characters) :
You may now enter the new Logical Name for the device connected to this port. A maximum of 8 characters may be entered. If less than 8 characters are entered, the entry must be followed by striking the Enter key.