LaserShare is an intelligent printer controller that allows up to four or eight computers to send data to a single HP LaserJet Series II, IID, III, IIID, Brother HL8e* and HL8v*, or Wang LDP8 laser printer.
LaserShare connects directly into the optional I/O slot of the laser printer. Power is taken directly from the laser printer so there is no need for a power cord. LaserShare can accept data from all ports simultaneous and is printed on a first-in first-out basis. All LaserShare models come standard with a buffer that can range from 256K to 4.0 MB. LaserShare 4C comes with four EIA-232C serial ports, LaserShare 8C comes with eight serial ports, LaserShare 4E comes with two parallel and two serial ports, and LaserShare 4A comes with four parallel ports.
*The LaserShare device for the Brother HL8e and HL8v is referred to as LaserShare 4CB. This device is available with four (4) serial computer ports and a fixed buffer size of 256KB.
Tran-x high speed parallel/serial converter products allow you to extend parallel cables to 1000+ feet and allow your network server, graphics workstation, or PC to send/receive data at speeds up to 46,000 characters per second. You can use the Tran-x Series with BayTech Model 24SII or LaserShare for the fastest long distance peripheral sharing solution available anywhere. Modular cabling provides simplicity in connections between remote devices. Tran-xLPT-460card plugs directly into your PC expansion slot. Tran-x PS- 02 connects to your PC's parallel port. Tran-xSP-01connects to the Centronics connector of a parallel printer. Tran-xPS-02connects to the DB-25 parallel port of the BayTech 700 Series Print Master or 800 Series Print Master II peripheral sharing units.
