The Model 24SII DES will respond with:
Stop/Restart Output upon Receiving of XON/XOFF ? (Y/N): XON/XOFF Sent Based on buffer Full/Empty Condition ? (Y/N):
The first question addresses XON/XOFF flow control in the transmit data direction. The second question addresses XON/XOFF flow control in the receive data direction. You should then enter "Y" to enable XON/XOFF or "N" to disable XON/XOFF in the respective directions. For example, if you entered "N" in response to the transmit direction and "Y" in response to the receive direction, the Model 24SII DES will respond with:
Bidirectional
Port | Baud | Word | Stop | Parity | Xon | / | Xoff | |||||
Rate | Size | Bits | Xmit | Recv | ||||||||
2 | 38400 | 8 | 1 None | Off On | |||
| |||||||
Exit/Save | ......1 | Set | Stop Bits..... | 4 |
| ||
Set | Baud Rate..2 | Set | Parity........ | 5 |
| ||
Set | Word Size..3 | Set | XON/XOFF...... | 6 |
| ||
Enter Request :
If there are no other changes for this port, send "1" (Exit/Save), and the Model 24SII DES will respond with:
Bidirectional
Port | Baud | Word | Stop | Parity | Xon | / | Xoff | |||||
Rate | Size | Bits | Xmit | Recv | ||||||||
1 | 9600 | 8 | 1 | None | Off Off | |||||
2 | 38400 | 8 | 1 | None | Off On | |||||
3 | 9600 | 8 | 1 | None | Off Off | |||||
4 | 9600 | 8 | 1 | None | Off Off | |||||
| ||||||||||
Enter | Port Number (ENTER=Exit) : |
|
|
| ||||||