HP 24SII manual Hso+

If you are connecting a device other than another BayTech product, you must refer to the operator's manual for your equipment to determine which pins are defined as TX+, TX-, RX+, and RX-.

If you are using 4-wire Operation and bidirectional Printer Sharing Mode and connecting to another BayTech product (such as Tran-x), please refer to Appendix A.7.4 for the recommended cable pinout.

￿￿￿￿￿￿￿ ￿ ￿￿￿ ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

COMPUTER PORTS

NOTE: Computer ports using this configuration will support hardware handshaking only. You must ensure hardware handshaking is supported by the equipment that will connect to these ports.

Computer ports on the M24SII-V07 module using EIA-422 Protocol, 4- wire Operation, and unidirectional Printer Sharing Mode utilize the following pins and signals for communication:

RJ-11 PIN-OUT INFORMATION

PIN	SIGNAL	DIRECTION	DESCRIPTION
	EIA-422
1	HSO+	Output	Handshake Out (+)
2	HSO-	Output	Handshake Out (-)
3	RX-	Input	Receive Data (-)
4	RX+	Input	Receive Data (+)

￿￿