CAUTION: You must install the new memory module into the appropriate location to assure proper operation. You may only have one type of memory module installed.
5.Remove the four nuts on the appropriate location with the nut driver or socket and place the nuts in a safe place.
6.Install the new memory module into the appropriate location by matching the four holes on the module with the bolts on the bottom panel. The ribbon cable should face away from the LEDs on the front panel. Secure the memory module in place with the four nuts by tightening them with the nut driver or socket.
7.Plug the ribbon cable onto the appropriate
8.If you need to install any additional memory onto the memory module, please refer to Appendix C.1 for the