HP 24SII manual Des

Step	Instructions/Application Questions	Action/Special Instructions
	printer or plotter, you must reconfigure
	the Port Designation of a parallel port on
	the Model 24SII DES to be a printer port.
	Additionally you must reconfigure the
	Port Designation for Port 2 of Module 1
	to a computer port.
7	Will you be connecting any serial devices	If yes, proceed to Step 9.
	that will communicate with serial	If no, proceed to Step 8.
	parameters different than 9600 baud, 8
	data bits, 1 stop bit, no parity, and
	XON/XOFF handshaking disabled (e.g.,
	2400 bps external modem)?
8	Do you have to reconfigure any Port	If yes, proceed to Step 9.
	Designations on the Model 24SII DES
	(see Steps 4, 5, or 6).	If no, proceed to Step 10.
9	If you need to reconfigure the Model	Please see Section 4.6 for instructions
	24SII DES with respect to Port	and then proceed to Step 10.
	Designation and/or Serial Port
	Configuration, you will need to access
	configuration mode to make the
	appropriate changes.
10	Proceed with cabling your devices to the	See Section 5 for more cabling
	appropriate ports on the Model 24SII	information and Appendix A for
	DES.	recommended cabling pin outs. Proceed
		to Step 11.
11	If you will be using the BayTech software	Proceed to Step 12.
	to select between peripherals, please
	see the README file created by running
	the INSTALL program. Please see
	Section 4.2 for instructions.
12	If using IBM compatible PCs, see	If you have any questions, please call a
	Section 4.7 for hints on PC set-up.	BayTech Applications Engineer at 1-800-
		523-2702.

￿￿