If 0 (zero) is entered, the Input Inactivity Timeout will be disabled, and the end of a print job will occur only when the computer sends the Port Select Code followed by a printer port number.

* * * CAUTION! * * *

Do not set the Input Inactivity Timeout to zero seconds when Port Select Mode B has been selected. Mode B recognizes the end of a print job only by the Input Inactivity Timeout. It does not recognize the manual disconnect where the computer sends the Port Select Code and a port number.

For example, if you entered "100" for 100 seconds, the Model 24SII DES will respond with:

Input Inactivity Timeout is 100 Seconds

Enter New Value (0 to 200), or ENTER for no change :

If no other change is required, strike the Enter key. The Model 24SII DES will respond with the reconfigured status and the prompt. You may now set the timeout for another computer port, or exit by striking the Enter key. The Model 24SII DES will save the new Input Inactivity Timeout(s) permanently in non-volatile memory and will subsequently power-up with the new timeout period(s) in effect.

The Model 24SII DES will now return to the main configuration menu (see Section 8.1).

￿￿