HP 24SII manual Set Port Designation

&￿￿ ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

OPTION ACCESSIBILITY: Through any serial computer port.

The Model 24SII DES will respond to the receiving of Control-T, capital C, and the desired module number with an identification block and a menu of the configuration options available, similar to the following:

Copyright (c) Bay Technical Associates, 1992

Model 24SII Data Exchange System Rev. 2.02

Total memory 1M
This Module is 1
Status	1
Program Port Logical Name		2
Set Port Designation		3
Program Port Select Code		4
Set Port Select Mode		5
Set Serial Port Configuration		6
Set Input Inactivity Timeout		7
Enable/Disable Form Feed Mode			8
Program I.D. Page Message		9
Enable/Disable I.D. Page Message			A
Select Print Schedule for I.D. Page		B
Program Default Printer Assignment			C
Program Module Printer Sharing Mode			D
Exit Configuration	X

For illustration purposes, we will show the configuration menus for Module 1 which are typical of the configuration menus generated by other modules.

NOTE: Menu selection is case sensitive. It is recommended that your keyboard be in the CAPS LOCK position.

NOTE: If you have configured a module and exited from configuration mode for that module, you must wait for the Model 24SII DES to reset before attempting to access configuration mode for ￿￿another module. It takes the Model 24SII DES 5 to 10 seconds to reset after exiting configuration mode for a module. The LEDs on the front panel will illuminate while the Model 24SII DES is resetting. Wait for the LEDs to go out before attempting to configure another module.