￿￿￿￿￿￿ ￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿ ￿ ￿￿￿ ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

NOTE: Ports using this configuration will support XON/XOFF handshaking only. You must enable XON/XOFF handshaking in configuration mode for these ports (see Section 8.8.1) and on the equipment that will connect to these ports.

Ports on the M24SII-V07 module using EIA-232 Protocol, 4-wire Operation, and bidirectional Printer Sharing Mode utilize the following pins and signals for communication:

RJ-11 PIN-OUT INFORMATION

PIN

SIGNAL

DIRECTION

DESCRIPTION

 

EIA-232

 

 

 

 

 

 

1

NC

----

No connection

 

 

 

 

2

TX

Output

Transmit Data

 

 

 

 

3

RX

Input

Receive Data

 

 

 

 

4

GND

----

Signal Ground

 

 

 

 

If you are connecting a device to a port on the M24SII-V07 module using EIA-232 Protocol, 4-wire Operation, and bidirectional Printer Sharing Mode, please see Appendix A.7.2 for device adapter pinouts and recommended cabling.

￿￿