HP 24SII manual #00 1+-2&+# %10 #

APPENDIX B

MODEL 24SII MODULE INSTALLATION

B.1 MODEL 24SII I/O MODULE

INSTALLATION

Each I/O module provided by BayTech includes one of the following

L-shaped,￿￿!￿￿￿---.(￿*./￿￿2modules:		#￿0￿01+￿￿￿￿￿￿-2&￿￿+￿￿#￿￿￿￿. '￿1%10￿￿#￿￿￿￿		&￿&￿.￿￿￿￿+￿￿￿.￿3%$.￿￿'￿0￿#￿
..	￿￿￿￿￿￿#￿￿￿￿￿￿￿￿0		0￿ ￿￿￿￿	&￿.￿￿

You will need the following equipment:

1x straight-slot screwdriver

1x phillips-head screwdriver

1.IMPORTANT: Remove power from the unit by depressing the power switch on the front of the unit to OFF and also remove power cord from socket.

2.I/O modules must be installed in sequence from left to right (facing rear of unit). There can be no empty slots between

modules. For example, if I/O modules are currently installed in the first three module slots, the new module must be installed ￿￿￿

in the 4th module slot. The module slots are labeled on the top panel as "Module 1", "Module 2", ..., "Module 6".