HP 24SII manual Number of Printers is Enter Number of Printers 1 to

&￿￿	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿'￿￿￿￿￿￿ "#￿
	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿(

NOTE: This section pertains only to the M24SII-V02 high speed parallel module.

OPTION ACCESSIBILITY: Through Port 1 of Module 1 only.

By responding to the Enter Request: message at the end of the main configuration menu for the M24SII-V02 high speed parallel module (see Section 8.1) with "3" (Set Number of Printers), you may set the Number of Printers you wish to have on the selected high speed parallel module.

The Model 24SII DES will respond with:

Number of Printers is	0
Enter Number of Printers (1 to 4)	:

Enter the desired Number of Printers.

NOTE: The higher numbered ports on the M24SII-V02 high speed parallel module are reserved as printer ports. For example, if you wish to define 2 printers on this module, enter "2" in response to the prompt above. Physically connect the printers to Port 3 and Port 4 of this module number.

The Model 24SII DES will return to the main configuration menu for the M24SII-V02 high speed parallel module (see Section 8.1) and display the following message:

Change your devices to match new configuration

This reminds you to connect the proper device to a newly configured computer or printer port. Computers and modems connect to ￿￿computer ports. Printers and plotters connect to printer ports.