If no additional change is required, strike the Enter key for no change, and the Model 24SII DES will respond with:
Form Feed at the End of Printing is ( Off )
Enter 1 for ON, 2 for OFF , ENTER for no change :
You should follow the same procedure as above to enable or disable form feed at the end of printing. For example, if you strike the Enter key for no change, the Model 24SII DES will respond with:
Port | Logical Name | Form feed | I.D. | ||
(Computer) | Begin End | Page |
1 | Device A | Off | Off Off | |||||||
3 | Device | C | On | Off | Off | |||||
4 | Device | D | Off | Off | Off | |||||
Enter Port Number (ENTER=Exit) :
You may now set the Form Feed Mode for another port, or exit by striking the Enter key. The Model 24SII DES will save the new form feed settings permanently in
The Model 24SII DES will now return to the main configuration menu (see Section 8.1).
