Control panel message | Description | Recommended action | |
|
|
| |
RAM DISK DEVICE FAILURE | For the HP Color LaserJet 3000 and 3800 | 1. Printing can continue for jobs that do not | |
alternates with | Series printers only. | require the RAM disk. | |
The RAM disk has failed. | 2. To remove this message from the | ||
Ready | |||
| display, press . | ||
To clear press |
|
| |
|
|
| |
RAM DISK FILE OPERATION FAILED | For the HP Color LaserJet 3000 and 3800 | 1. Printing can continue. | |
alternates with | Series printers only. | 2. To remove this message from the | |
The printer received a PJL file system | |||
Ready | display, press . | ||
command that attempted to perform an |
| ||
To clear press | illogical operation (for example, to download | 3. If the message reappears, there might | |
a file to a | be a problem with the software program. | ||
|
|
| |
RAM DISK FILE SYSTEM IS FULL | For the HP Color LaserJet 3000 and 3800 | 1. Use HP Web Jetadmin software to | |
alternates with | Series printers only. | delete files from the RAM disk memory | |
The printer received a PJL file system | and try again. | ||
Ready |
| ||
command to store something on the file | 2. To remove this message from the | ||
To clear press | system, but the file system is full. | display, press . | |
| See HP Web Jetadmin for more information. | ||
|
| ||
|
|
| |
RAM DISK IS WRITE PROTECTED | For the HP Color LaserJet 3000 and 3800 | 1. To enable writing to the RAM disk | |
alternates with | Series printers only. | memory, use HP Web Jetadmin to turn | |
The file system is protected and no new files | off write protection. | ||
Ready |
| ||
can be written to it. | 2. To remove this message from the | ||
To clear press |
| display, press . | |
| See HP Web Jetadmin for more information. | ||
|
| ||
|
|
| |
RAM DISK X Initializing | For the HP Color LaserJet 3000 and 3800 | No action necessary. | |
alternates with | Series printers only. |
| |
The new RAM disk installed in slot X is |
| ||
DO NOT POWER OFF |
| ||
initializing. |
| ||
|
|
| |
Receiving upgrade | A firmware upgrade is in progress. | Do not turn the printer off until the printer | |
|
| returns to Ready. | |
|
|
| |
REMOVE ALL PRINT CARTRIDGES | The printer is performing a component test. | Remove all print cartridges. | |
alternates with |
| After diagnostics are complete, reinstall all | |
To exit press STOP key |
| print cartridges. | |
|
| ||
|
|
| |
REMOVE AT LEAST ONE PRINT | The printer is performing a disable cartridge | Remove one print cartridge. | |
CARTRIDGE | check or component test. | After the test is complete, reinstall the print | |
|
| ||
alternates with |
| cartridge. | |
To exit press STOP key |
|
| |
|
|
| |
REPLACE <COLOR> CARTRIDGE | The print cartridge has reached its end of life. | Press for help. | |
alternates with | Printing will not continue until the cartridge is |
| |
replaced. | |||
For help press |
| supplies and parts for more information. | |
| See Supplies and accessories for more | ||
|
| ||
|
| information. | |
|
|
|
ENWW |