●Provides only pertinent information on the configuration page

●Allows the printer control panel to display protocol-specific error and warning messages

To disable IPX/SPX

NOTE Do not disable this protocol in Windows-based systems that print to the printer using IPX/SPX.

1.Press Menu.

2.Press to highlight CONFIGURE DEVICE, and then press .

3.Press to highlight I/O, and then press .

4.Press to highlight EMBEDDED JETDIRECT, and then press .

5.Press to highlight IPX/SPX, and then press .

6.Press to select ENABLE.

7.Press to highlight OFF, and then press .

8.Press Menu to return to the Ready state.

To disable AppleTalk

1.Press Menu.

2.Press to highlight CONFIGURE DEVICE, and then press .

3.Press to highlight I/O, and then press .

4.Press to highlight EMBEDDED JETDIRECT, and then press .

5.Press to highlight APPLETALK, and then press .

6.Press to select ENABLE.

7.Press to highlight OFF, and then press .

8.Press Menu to return to the Ready state.

To disable DLC/LLC

1.Press Menu.

2.Press to highlight CONFIGURE DEVICE, and then press .

3.Press to highlight I/O, and then press .

4.Press to highlight EMBEDDED JETDIRECT, and then press .

5.Press to highlight DLC/LLC, and then press .

6.Press to select ENABLE.

7.Press to highlight OFF, and then press .

8.Press Menu to return to the Ready state.

ENWW

Network configuration 47