Software program problems
Cannot change system selections
Cause | Solution |
|
|
The printer control panel locks out system software changes. | Contact the network administrator. |
|
|
The software program does not support system changes. | See the software program documentation. |
|
|
The correct printer driver is not loaded. | Load the correct printer driver. |
|
|
The correct program driver is not loaded. | Load the correct program driver. |
|
|
Cannot select a font from the software |
|
|
|
Cause | Solution |
|
|
The font is not available to the software program. | See the software program documentation. |
|
|
Cannot select colors |
|
|
|
Cause | Solution |
|
|
The software program does not support color. | See the software documentation. |
|
|
Color mode is not selected in the software program or printer | Select Color mode instead of Grayscale or Monochrome |
driver. | mode. |
|
|
The correct printer driver is not loaded. | Load the correct printer driver. |
| |
Printer driver does not recognize tray 3 or the | |
|
|
Cause | Solution |
|
|
The printer driver has not been configured to recognize tray 3 | See the printer driver online Help for instructions to configure |
or the | the driver to recognize printer accessories. |
|
|
The accessory might not be installed. | Verify that the accessory is installed correctly. |
|
|
168 Chapter 8 Problem solving | ENWW |