4.Move the side width guides until the arrow on the right width guide points to the size that you are loading.

5.Load the media into the tray. If this is special paper, such as letterhead, load it face-up with the top edge toward the front of the tray.

NOTE If you are duplex printing, see Using 2-sided (duplex) printing for loading instructions.

6.Make sure that the stack of media is flat in the tray at all four corners, and keep it below the height tabs.

ENWW

Configuring trays 65

Page 79
Image 79
HP 3800, 3000 manual Enww