Table 27 Structure and Identifier of Parameters (UnitePathGroup Tag)
Layer | Identifier | Content | Description |
|
|
|
|
The first layer | None | Information about the path | This layer is required. |
|
| group to which you want to |
|
|
| move an external volume. |
|
|
|
|
|
The second layer | +, | Information about the path |
|
| group that you want to |
|
| change. |
Specifies one row for each alternate path group.
External volumes in two or more path groups can be moved to one path group by specifying two or more path groups.
Table 28 (page 117) shows the parameters that can be set for the UnitePathGroup tag. Table 28 UnitePathGroup Tag Parameters
Layer | Column in | Parameter | Setting | Range of Values | Number of | |
| Spreadsheet |
|
|
|
| Characters |
|
|
|
|
|
| |
The first layer |
| Information about the path group to which you want to move | ||||
|
|
| an external volume. |
|
| |
|
|
|
|
|
|
|
| A | PathGroup | Path group |
| 0 to 63231 | 5 decimal digits or |
|
|
| number. |
|
| fewer |
|
|
|
|
|
| |
The second layer |
| Information about the path group that you want to change. | ||||
|
|
|
|
|
|
|
| A | + | Identifier. |
| N/A | N/A |
|
|
|
|
|
|
|
| B | TargetPathGroup | Path group | 0 to 63231 | 5 decimal digits or | |
|
|
| number. |
| less | |
|
|
|
|
|
|
|
Example of a Spreadsheet
This section shows an example of a spreadsheet that can be used for mapping an external volume in the following configuration:
•An external volume is configured as follows:
◦Map the volume to which 0001 is configured as a LUN that can be discovered through the primary path.
◦Use 1 for a path group number.
◦Configure
•Two
◦The primary path
Port number on the local storage system: 1A
WWN on the external storage system: 60060E8004F81370
◦The alternate path
Port number on the local storage system: 1B
WWN on the external storage system: 60060E8004F81371
•Attributes of an external volume are configured as follows:
◦Emulation type:
◦Cache mode: Enable
Example of a Spreadsheet 117