login Command

Syntax

loginuser-IDpassword

Description

Specifies the login user ID and the password. The svpip command must be written before this command. If you specify an authentication file when you run the ExPath tool, this command will be ignored.

Parameters

Parameter

Description

 

 

user-ID

Specifies the user ID of Remote Web Console.

 

 

password

Specifies the password for the user ID of Remote Web

 

Console.

 

 

Example

The following example uses root as a user name and password as a password:

svpip 158.214.127.170 login root password

disconnect Command

Syntax

disconnectExG-VPG[ExG-VPG...]

Description

Disconnects external volumes. This command executes the same operation as the Disconnect External Volumes command which you perform by using the Volume Operation window. After the disconnect command is performed, only the external storage system can access the external volumes.

The disconnect command cannot be performed if the external volume is configured as a P-VOL or S-VOL for the copy program products. See (page 91) for required operations and notes to perform the disconnect command.

The sample file disconnect.txt is provided for your use.

Parameters

Parameter

Description

 

 

ExG-VPG

ExG specifies the external volume group in the range of

 

E1 to E16384. VPG specifies the serial number within an

 

external volume group in the range of 1 to 4096.

 

 

Example

The following example disconnects the E1-1 and E1-2 external volumes:

disconnect E1-1 E1-2

Command Reference 163