emulation type of the mapped external volume is for the mainframe system, the capacity is shown in Cylinder.

•Close button

Closes the LDEV Information dialog box.

Mapping Path Information Dialog Box

The Mapping Path Information dialog box shows the information on the mapping paths that connect the internal volume and the external volume.

Figure 36 Mapping Path Information Dialog Box

The Mapping Path Information dialog box consists of:

•List

◦Priority: Priority of the mapping path. 1 indicates the mapping path with the highest priority.

◦Port: The port number in the local storage system connecting to the external storage system.

◦WWN: Identification number of the port in the external storage system.

◦LUN: LU number set to the external volume.

◦Status: Status of the mapping path. Table 12 (page 86) lists and describes the status terms that are displayed on the Mapping Path Information dialog box. For required actions for each path status, see “Mapping Path Statuses and Required Actions” (page 127).

•Close button

Closes the Mapping Path Information dialog box.

•Pop-up menu

The Mapping Path Information dialog box does not have a pop-up menu that can be displayed.

Table 12 Status of the Mapping Paths in the Mapping Path Information Dialog Box

Displayed Item

Description

 

 

Normal

The mapping path is normal.

 

 

-

The status of the mapping path is not retrieved yet. Click Status:Disable and

 

change the button name to Status: Enable in the Volume Operation window to

 

display the status of the mapping path.

 

 

Unknown

The status of the mapping path is unknown.

 

 

Blockade

The mapping path is blocked.

 

 

86 Performing XP External Storage Operations