Guidelines for Remote Command Devices
Notices on remote command device are as follows:
•You can map a command device as a remote command device when one of the following storage systems is connected as an external subsystem.
◦Universal Storage Platform V
◦Universal Storage Platform VM
◦TagmaStore Universal Storage Platform
◦TagmaStore Network Storage Controller
◦Adaptable Modular Storage
◦Workgroup Modular Storage
◦Lightning 9900V series
◦Thunder 9500V series
◦SANRISE Universal Storage Platform
◦SANRISE Network Storage Controller
◦SANRISE9900V series
◦SANRISE9500V series
◦H24000
◦H20000
◦SANRISE H12000
◦SANRISE H10000
◦SANRISE H1024/H128
◦HP StorageWorks XP24000 Disk Array
◦HP StorageWorks XP20000 Disk Array
◦HP StorageWorks XP12000 Disk Array
◦HP StorageWorks XP10000 Disk Array
◦HP StorageWorks XP1024/XP128 Disk Array
•You do not need the license for XP External Storage to map a command device as a remote command device.
•The remote command devices appear in the Device column on the Volume Operation window (see Table 29 (page 121)):
