A Connecting External Storage Systems
This appendix provides configuration information for connecting various external storage systems to the HP XP24000/XP20000 storage systems.
AMS/WMS Storage System
System Parameters
Table 34 (page 134) explains whether to specify system parameters when making settings on ports on the AMS and WMS storage systems. You can either specify or omit any other parameters.
When connecting an AMS or WMS storage system, use Remote Web Console Modular or Remote Web Console Modular 2 to set the data transfer speed of the external port to a fixed value other than Auto. Also, set the data transfer speed of the target port of the AMS or WMS storage system to a fixed value according to the data transfer speed of the external port.
Table 34 System Parameters (AMS/WMS)
Window Names | Parameters | Parameter Settings |
Boot Options | Start Attribute |
|
| Single Mode | Specify this parameter when the TagmaStore |
|
| AMS storage system or TagmaStore WMS |
|
| storage system is in the one controller |
|
| configuration. |
| Dual Active Mode | Specify this parameter when the TagmaStore |
|
| AMS storage system or TagmaStore WMS |
|
| storage system is in the two controller |
|
| configuration. |
| Delay Planned Shutdown | You can either specify or omit specifying this |
|
| parameter. |
| Drive blocking mode | You can either specify or omit specifying this |
|
| parameter. |
| Vendor ID | Keep the default parameter and do not change. |
| Product ID | Keep the default parameter and do not change. |
| ROM Microcode Version | You can either specify or omit specifying this |
|
| parameter. |
| RAM Microcode Version | You can either specify or omit specifying this |
|
| parameter. |
System Parameter | Option | You can either specify or omit specifying this |
|
| parameter. |
| Operation if the processor failure | Specify this parameter to Reset of occurred. |
| occurs |
|
| WEB Title | You can either specify or omit specifying this |
|
| parameter. |
| Write and verify mode | Set this parameter to ON for AMS 1000, AMS |
|
| 500, AMS 200, and WMS 100. |
|
| Set this parameter to OFF for AMS 2500, AMS |
|
| 2300 and AMS 2100. |
Port Options | Port Option | You can either specify or omit specifying this |
|
| parameter. |
134 Connecting External Storage Systems
