Installing hardware devices in the memory expansion module

The following sections provide detailed instructions for installing optional hardware devices in the optional IBM MAX5 for System x memory expansion module.

Memory expansion module components

The following illustration shows the major components in the memory expansion module. The illustrations in this document might differ slightly from your hardware.

Removing the memory expansion module bezel

To remove the memory expansion module bezel, complete the following steps:

1.Read “Safety” on page v and “Installation guidelines” on page 38.

2.Press in on the release tabs on both ends of the bezel and pull it off the chassis.

Chapter 2. Installing optional devices 81

Page 95
Image 95
IBM 71453RU manual Installing hardware devices in the memory expansion module, Memory expansion module components